5-10 tph Mining Ore Double Roller Crusher Machine for Rock, Pebble
Descriptions of Roll Crusher:
The roll crusher machine can be classified into single roll
crusher, double roll crusher, and four-roller crusher according to
the roller quantity. Double roll crusher, also known as toothed
roll crusher, is the most commonly used. Based on the roller speed,
roll crusher machine is laid in high-speed roll crusher, low-speed
roll crusher, and differential-speed roll crusher.
Working principles of Mine Ore Roller Crusher:
The main parts of roll crusher are two rollers, one fixed roller
and one movable roller. The two rollers are driven by wheels and
belts. When the roll crusher machine works, the movable roller is
pushed by the spring between the body and wheel to rotate forth and
back. Materials fed by the vibrating feeder fall between the two
rollers and get squeezed and crushed. Qualified particles will
through the teeth on the rollers and are exhausted out.25 T/H
Mining Ore Double Roller Crusher Machine.
Specifications of Double Roll Crusher:
| Model | 2PG400×250 |
| Roller Diameter (mm) | 400*250 mm |
| Max. Inlet Size (mm) | ≤25 |
| Discharge Granulator (mm) | 2--8 |
| Capacity (t/h) | 5--10 |
| Spares for Above Smooth Roller Crusher |
| 1.Motor 2.Motor Wheel 3.Belt 4. Flywheel 5.Rotor 6.Buffer Spring 7.
Bearing Housing 8.Roller Body |
| Rollers | 2 PCs / Set |
| Bearing Housing | For Fix Roller |
Product advantages of 5-10 TPH Roller Breaker:
- Large crushing ratio. When a larger crushing ratio is needed, a
crushing stick-shaped device can be equipped under the rollers to
adjust the crushing ratio.
- Simple structure. The modularized frame allows roll crusher to be
installed at your place or to have a grouped installation.
- Low over-crushing rate. Roller crusher machine adopts a combined
crushing mode, not impaction, which avoids a second crushing in the
body.
Service policy:
1.The device type
2.For customer training and technical personnel
3.According to customer request, design and manufacture products
4.The company send engineers and technical person to the user’
site, planning for the optimal design of the flow field, and the
solutions
1.Acceptance of the product
2.Assist client protocol construction scheme
1.On site training personnel
2.Appoint special after-sale service staff , arrived at the site
and guide clients installation and commission.
Note:This specification is just for reference, any changes are
subject to the products
